← All tools/Calculators/Time & Date/Work Hours Calculator

Work Hours Calculator

Your hours for the week, from start and end times minus breaks.

Monmin break
Tuemin break
Wedmin break
Thumin break
Frimin break
Satmin break
Sunmin break
h/week

Total hours this week

—

Mon
Tue
Wed
Thu
Fri
Sat
Sun

How it works

Day hours = end time − start time − break
Week total = sum of the 7 day hours
Regular hours = smaller of week total and overtime threshold
Overtime = week total − regular hours (0 if the total is under the threshold)

The calculator works day by day. For each day it takes the end time minus the start time, then subtracts the break minutes you entered for that day, giving that day’s working hours. Adding the seven days gives the week total. The overtime threshold then splits the total: the regular hours are the smaller of the week total and the threshold, and anything above the threshold is overtime — zero if the total is under it. Breaks are in minutes and the threshold is in hours a week, so a 60-minute break is one hour and a 40-hour threshold is the usual full-time week. The method applies to fixed weekly schedules with one break a day. It does not handle overnight shifts, split shifts, or paid breaks that should count as work.

Worked example: Monday to Friday, 09:00 to 17:00 with a 60-minute break, is 8 − 1 = 7 hours a day, so 5 × 7 = 35 hours a week. With a 40-hour overtime threshold, all 35 hours are regular time and overtime is 0.

Second worked example: a six-day office week in India, Monday to Saturday, 09:30 to 18:30 with a 45-minute lunch break. Each day is 9 hours minus 45 minutes, which is 9 − 0.75 = 8.25 hours. Over six days that is 6 × 8.25 = 49.5 hours a week. With a 48-hour overtime threshold, the regular hours are 48 and the overtime is 49.5 − 48 = 1.5 hours. If the threshold were 40 instead, the same week would be 40 regular hours and 9.5 hours of overtime.

Common mistakes

The commonest mistake is forgetting the break: a 60-minute lunch left out adds a phantom hour every day, or five hours across a five-day week, and the week total comes out far too high. A second mistake is leaving Saturday blank when you actually worked it — the calculator treats an empty day as a day off, so a six-day week silently loses a whole day. A third is setting the overtime threshold to 40 out of habit when your contract says 48, which turns six genuine regular hours into overtime on paper. Finally, check the break is in minutes, not hours: typing 1 for a one-hour break subtracts one minute, not one hour. Enter each day’s real start and end times rather than copying Monday across the week.

Frequently asked questions

What counts as overtime?

Hours above the threshold you set — 40 a week is the usual default, but your contract or local law may set a different figure. In India, many offices use a 48-hour week, so the same hours can be regular time under one threshold and overtime under another. The calculator only splits the hours you enter; it does not decide what your employer owes you for them.

What if I work past midnight?

This tool treats an end time earlier than the start time as a mistake and flags the day — it does not assume an overnight shift. Split an overnight shift across two days instead: put the hours before midnight on the first day and the hours after midnight on the second. That keeps each day’s maths honest and the week total correct.

Do breaks count as work?

No — the break minutes you enter are subtracted from each day, since unpaid breaks are not working time. A 60-minute lunch on a 09:00 to 17:00 shift leaves 7 working hours, not 8. If your break is paid and counts as working time, enter 0 minutes for the break so the full span between start and end is counted.

Why do Saturday and Sunday start at 00:00?

They are days off by default. Set their times to count weekend work. Many people work Monday to Friday only, so the calculator starts with the weekend empty rather than assuming two extra working days. If you work Saturdays, fill in Saturday’s start, end and break the same way as the weekdays, and the week total will include it.

Does this calculator work out my pay?

No — it counts hours only, not money. To work out pay, multiply the regular hours by your hourly rate and the overtime hours by your overtime rate, then add the two together. If you are salaried, the split still helps: it shows how much of your week was above the threshold, which is the figure to raise with your employer or HR.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.