← All blog posts

How to calculate potential energy

WhiteUI · A plain-English guide to the Potential Energy Calculator

Potential energy is the energy an object holds because of where it sits: a brick on a roof, a book on a shelf, water held back by a dam. Working it out takes one short formula and three numbers, and the Potential Energy Calculator does the arithmetic for you.

Five numbered steps: weigh it, measure height, use 9.81, multiply, read joules
In plain words: Weigh it, measure the height, multiply by 9.81 — a 2 kg brick at 10 m holds 196.2 joules.

What potential energy is

Hold a brick at arm's length and let go. It speeds up as it falls, and it lands with a thud. That stored energy is potential energy: energy an object has because of its height above some chosen level, usually the ground or the floor. It is measured in joules.

The three numbers you need

The formula is PE = m × g × h. The m is the mass in kilograms — how heavy the object is. The h is the height in metres — how far above your chosen level it sits. The g is gravity, 9.81 metres per second squared on Earth.

Step 1: weigh it in kilograms

Start with the mass, and make sure it is in kilograms. A kitchen scale reads in grams, so divide by 1,000: a 500 gram book is 0.5 kg, a 70 kilogram person is 70 kg. This is the step where most mistakes happen, because a mass written as 500 instead of 0.5 gives an answer one thousand times too big.

Step 2: measure the height in metres

Next, measure the height from the level you are measuring from — usually the floor or the ground — up to the object. A book on a shelf 1.5 metres up has a height of 1.5 m. If you measure in centimetres, divide by 100 first: 150 cm is 1.5 m, and putting 150 into the formula would give an answer one hundred times too big.

Step 3: multiply — worked example

Take a 2 kg brick held 10 metres up. Put the numbers into PE = m × g × h: 2 × 9.81 × 10. Multiply the first two numbers first: 2 × 9.81 = 19.62. Then multiply by the height: 19.62 × 10 = 196.2. The answer is 196.2 joules.

Worked example: a 5 kg bag at 3 m

Try a second one: a 5 kg bag of rice on a shelf 3 metres up. The formula gives 5 × 9.81 × 3. First, 5 × 9.81 = 49.05. Then 49.05 × 3 = 147.15. The bag holds 147.15 joules. The bag is heavier than the brick but lower down, so its answer is smaller: 147.15 joules against 196.2.

The common mistake

The usual mistake is mixing up the units: grams instead of kilograms, or centimetres instead of metres. A 500 gram book at 1.5 m holds 0.5 × 9.81 × 1.5 = 7.36 joules. Put 500 in for the mass and the answer comes out as 7,357.5 joules — one thousand times too big, and plainly wrong for a book.

Frequently asked questions

What is the formula for potential energy?

PE = m × g × h: mass in kilograms, times gravity (9.81 on Earth), times height in metres. The answer is in joules.

What is an example of potential energy?

A 2 kg brick held 10 m up holds 196.2 J. A 5 kg bag on a 3 m shelf holds 147.15 J.

Does potential energy depend on height or mass more?

Both equally. Doubling either one doubles the energy: 2 kg at 5 m is 98.1 J, and 2 kg at 10 m is 196.2 J.

What unit is potential energy measured in?

Joules (J). One joule is one kilogram metre squared per second squared, which is what kg × m/s² × m works out to.

More guides on the Potential Energy Calculator

Try it yourself

Try the Potential Energy Calculator — free, in your browser.

Open the Potential Energy Calculator