← All blog posts

How to calculate force

WhiteUI · A plain-English guide to the Force Calculator

Force is a push or a pull, and working it out takes three steps: find the mass, find the acceleration, then multiply the two together. That is Newton’s second law, written as F = m × a, and it is the whole of what the Force Calculator does. Open the tool and it already shows the answer for its starting numbers: a mass of 10 kg and an acceleration of 2 m/s² give a force of 20 N. The steps below take you from those starting numbers to any force of your own, and they work the same way whether the answer is 4 N or 3,600 N.

Bar diagram comparing a force of 20 newtons with a force of 100 newtons
In plain words: the same rule gives both answers. A 10 kg mass at 2 m/s² needs 20 N, and a 25 kg mass at 4 m/s² needs 100 N.

Step 1: find the mass

Mass is how much stuff is in the object, measured in kilograms. A bag of flour is about 1 kg, a school bag is about 5 kg, an adult is about 70 kg, and a small car is about 1,200 kg. The number you need is the mass in kilograms, so if your figure is in grams, divide by 1,000 first: 500 g is 0.5 kg, and 2,500 g is 2.5 kg. Type the mass into the first box on the tool, or drag the slider underneath it, and the result updates at once. If you are not sure of a mass, weigh the object on bathroom scales, which read in kilograms, and use that number.

Step 2: find the acceleration

Acceleration is how fast the speed is changing, measured in metres per second squared, written m/s². A car pulling away gently accelerates at about 2 m/s², a brisk start is about 4 m/s², and a dropped object speeds up at 9.81 m/s² because gravity pulls it down. You can also work the acceleration out from a change in speed: a car that goes from 0 to 20 m/s in 10 seconds has an acceleration of 20 ÷ 10 = 2 m/s². Put that number in the second box. The tool accepts a negative acceleration too, which means the object is slowing down, and the force comes out negative to show it acts the other way.

Step 3: multiply

Multiply the mass by the acceleration and the answer is the force in newtons, written N. That is all the maths there is. With the tool’s starting numbers, 10 kg × 2 m/s² = 20 N. A heavier object needs more force for the same acceleration, and a bigger acceleration needs more force for the same mass, because both numbers are multiplied. If you double the mass and keep the acceleration the same, the force doubles; if you double the acceleration and keep the mass the same, the force doubles as well. The tool does the multiplication for you and shows the result in the big number at the top.

Worked example

Suppose you push a 25 kg box and it speeds up at 4 m/s². The mass is 25 kg and the acceleration is 4 m/s², so the force is F = 25 × 4 = 100 N. That is the force you have to apply to get that acceleration, before friction is counted. A second example uses weight, which is the same law with gravity doing the accelerating: a 70 kg person weighs F = 70 × 9.81 = 686.7 N on Earth. And a third, smaller one: a 0.5 kg ball kicked so it accelerates at 8 m/s² feels F = 0.5 × 8 = 4 N. Three different situations, one multiplication each.

The common mistake

The most common mistake is putting the weight in as the mass. A person who weighs 686.7 N has a mass of 70 kg, and the 70 is the number that goes into F = m × a, not the 686.7. Putting 686.7 in as the mass would give 686.7 × 2 = 1,373.4 N for an acceleration of 2 m/s², which is nearly twenty times too big. The second most common mistake is forgetting to change grams into kilograms: 500 g is 0.5 kg, so 500 g at 9.81 m/s² is 4.905 N, not 4,905 N. Check your units before you multiply, and the answer will be right.

Frequently asked questions

How do I calculate force?

Multiply mass by acceleration: F = m × a. A mass of 10 kg at 2 m/s² needs 10 × 2 = 20 N.

What are the units of force?

Newtons, written N. One newton is the force that accelerates a 1 kg mass by 1 m/s².

What is the force on a 70 kg person?

Their weight is 70 × 9.81 = 686.7 N on Earth, because gravity accelerates them at 9.81 m/s².

Can the answer be negative?

Yes. A negative acceleration gives a negative force, which means the force acts in the opposite direction, like braking.

More guides on the Force Calculator

Try it yourself

Try the Force Calculator — free, in your browser.

Open the Force Calculator