Density common mistakes to avoid
Most wrong answers come from a small set of slips, not from hard maths. Here are the ones to watch for, with the correction for each.
Dividing volume by mass instead of mass by volume. Density is mass ÷ volume. Swapping them gives the reciprocal: 250 ÷ 500 = 0.50, which is not a density at all, just the inverse of the right answer.
Mixing grams with kilograms, or cm³ with m³. 500 grams in 0.00025 m³ is 2,000,000 g/m³ if the units are not converted together. Keep mass and volume in one consistent pair — grams with cm³, or kilograms with m³.
Estimating the volume of an irregular object from its length. A rough block is not a box. Measure volume by water displacement — the rise in a measuring cylinder — instead of multiplying three approximate edges.
Worked example to test yourself against: A sample of 500 grams occupying 250 cm³ has a density of 500 ÷ 250 = 2.00 g/cm³ — twice as dense as water, so it sinks. A second example: 900 grams in 300 cm³ gives 900 ÷ 300 = 3.00 g/cm³. And 1,000 grams in 1,000 cm³ gives exactly 1.00 g/cm³, the density of water. If your calculator gives a different answer for those inputs, one of the slips above is almost certainly the cause.
Frequently asked questions
What is the single most common mistake?
Entering a number in the wrong unit, or dividing the wrong way round. Convert to the base unit first, every time.
How do I catch a mistake before it matters?
Sanity-check the answer: does it sit in a plausible range, and does changing one input move it in the direction you expect?
What if my result looks wrong?
Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.
More guides on the Density Calculator
Enter mass and volume to see density in grams per cubic centimetre.