← All tools/Calculators/Math/Trigonometry Calculator

Trigonometry Calculator

Work out sine, cosine, tangent and the other trig functions for any angle — in degrees or radians.

Enter the angle in degrees.

sin 30°

0.5

sin 30° = 0.5 · angle 30° = 0.5236 rad

sin
0.5
cos
0.866
tan
0.5774
Breakdown
Selected functionsin 30° = 0.5
Angle in degrees30°
Angle in radians0.5236 rad
sin0.5
cos0.866
tan0.5774
csc (1 / sin)2
sec (1 / cos)1.1547
cot (1 / tan)1.7321

For an inverse function, enter a value above and the big answer is the angle; the six values in the table are for that resulting angle.

How it works

sin θ = opposite / hypotenuse
cos θ = adjacent / hypotenuse
tan θ = sin θ / cos θ
csc θ = 1 / sin θ, sec θ = 1 / cos θ, cot θ = 1 / tan θ
Radians = degrees × π / 180

At 30°, sin is 0.5, cos is 0.866, tan is 0.5774, csc is 2, sec is 1.1547 and cot is 1.7321, and 30° is 0.5236 radians. At 45°, sin and cos are both 0.7071. For the inverse, arcsin 0.5 is 30°, because sin 30° is 0.5.

Frequently asked questions

What are sine, cosine and tangent?

On a right-angled triangle, sin θ is opposite over hypotenuse, cos θ is adjacent over hypotenuse, and tan θ is sin θ divided by cos θ. At 30°, sin is 0.5, cos is 0.866 and tan is 0.5774.

How do degrees and radians relate?

Radians = degrees × π/180, so 30° is 0.5236 radians and 180° is π radians. Use the unit switcher above to enter the angle either way.

Why does the calculator sometimes say undefined?

Some values have no answer: tan 90° and sec 90° are undefined because cos 90° is 0, and csc 0° and cot 0° are undefined because sin 0° is 0. Dividing by zero has no value, so the calculator says so instead of showing infinity.

How do the inverse functions work?

Arcsin, arccos and arctan work backwards: give them a value and they return the angle. Arcsin 0.5 is 30°, because sin 30° is 0.5. Arcsin and arccos only accept values from −1 to 1; anything outside that range is clamped to the nearest end.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.