How to get an accurate result from the Standard Deviation Calculator
The Standard Deviation Calculator does the arithmetic exactly. Accuracy comes from what you type in and how you check — three quick tests cover nearly every wrong answer.
Test 1 — square the standard deviation back to the variance
The standard deviation squared must equal the variance. For 10, 20, 30, 40 and 50, the population standard deviation is 14.14 and the variance is 200: 14.14² = 199.94, which is 200 apart from the rounding of the last digit. If the square lands far from the variance, one of the two numbers is wrong.
14.14² = 199.94, about 200 (the population variance) 15.81² = 249.96, about 250 (the sample variance)
Test 2 — the distances from the mean add to zero
For the same list, the distances are −20, −10, 0, 10 and 20, and they add to exactly 0. That is always true, for any list, because the mean is the balance point. If your distances do not add to zero, the mean is wrong — and everything built on it is wrong too.
Test 3 — the standard deviation sits between zero and the range
The standard deviation can never be negative, and it can never be bigger than the range. For 10, 20, 30, 40 and 50, the range is 40 and the standard deviation is 14.14, which sits comfortably inside. An answer outside that band is impossible, so it means a number was typed wrong.
Range = 50 − 10 = 40 0 ≤ 14.14 ≤ 40 — the answer is possible
At a glance
The mistake to avoid
Typing a number twice, or missing one out. Drop the 50 from the list and the mean falls from 30 to 25, the variance falls from 200 to 125, and the standard deviation falls from 14.14 to 11.18 — every answer changes, and nothing looks obviously wrong. Count your numbers before you paste them in, and check the count line on the tool: it should match the numbers you meant to enter.
10, 20, 30, 40 (without 50): mean 25, pop variance 125, pop SD 11.18
Three checks or one? Which check catches which error
The three tests on this page catch different mistakes, so it is worth knowing which one to reach for. Squaring the standard deviation back to the variance catches a wrong standard deviation — a misread line, or a square root taken twice. The distances adding to zero catches a wrong mean, because everything in the formula is built on the mean. The range band catches a typo, because a wild number pushes the answer outside what is possible.
Try them on a fresh list: 100, 105, 110, 115 and 120. The mean is 110, the population standard deviation is 7.07 and the sample version is 7.91. The range is 20, so 7.07 sits inside it. And 7.07² = 49.98, which is the population variance of 50 apart from rounding. Three checks, three passes, one minute — and if any of them fails, you know which part of the calculation to look at.
The typing error no test catches on its own
There is one error the three tests cannot catch: a wrong number that is still plausible. Type 150 instead of 105, and the list becomes 100, 150, 110, 115 and 120. The mean moves to 119 and the population standard deviation jumps to 16.85 — more than double the right answer of 7.07. Every check still passes: the square works, the distances still add to zero, and 16.85 sits inside the new range of 50. The arithmetic is right; the input is wrong.
The only guard against that is to look at the list itself before you trust the answer. Check the count line on the tool — it should match the numbers you meant to enter — and eyeball the list for a number that does not belong. A 150 among 100s and 110s stands out if you look for it, and it is invisible if you do not.
Frequently asked questions
How do I check a standard deviation answer?
Square it: the result should equal the variance. 14.14 squared is 199.94, about 200, which is the population variance of 10, 20, 30, 40 and 50.
What is the range of 10, 20, 30, 40, 50?
40. The range is the largest minus the smallest: 50 minus 10.
Can a standard deviation be bigger than the range?
No. It can never be negative, and it can never be bigger than the range. For 10, 20, 30, 40 and 50, the standard deviation of 14.14 sits inside 0 to 40.
What happens if I leave a number out?
Every answer changes. Without the 50, the mean falls from 30 to 25 and the population standard deviation falls from 14.14 to 11.18.
More guides on the Standard Deviation Calculator
- How to use the Standard Deviation Calculator — step by step
- Standard Deviation Calculator explained with worked examples
- Standard Deviation Calculator formula — how it actually works
- Standard Deviation Calculator for beginners — start here
- Common mistakes people make with the Standard Deviation Calculator
- Standard Deviation Calculator vs doing it by hand — which is faster?
- standard deviation calculator — the complete guide
- Standard Deviation Calculator for students — with examples
- Standard Deviation Calculator for homeowners and DIYers
Find the mean, variance and standard deviation of any list of numbers — free, in your browser.