← All blog posts

Fraction Calculator for homeowners and DIYers

WhiteUI · A plain-English guide to the Fraction Calculator

On a job, fractions are measurements: inches on a tape, litres in a tin, centimetres on a board. This guide shows the Fraction Calculator doing the three sums that come up most for homeowners and DIYers, with the numbers checked.

Adding lengths: 3/4 inch + 1/2 inch

Two pieces to join: one 3/4 inch, one 1/2 inch. Common denominator 4, so 1/2 = 2/4. Add the tops: 3 + 2 = 5, over 4. The total is 5/4 inches — that is 1 1/4 inches, or 1.25 in decimal. Cut the second piece a quarter inch longer than an inch and the joint lines up.

Paint: 2/3 of a 9-litre tin

A job needs two thirds of a 9-litre tin. 2/3 × 9 = 18 ÷ 3 = 6 litres. So 6 litres covers it and 3 litres stay in the tin — enough to know before you open it whether a second tin is needed.

Cutting a board: 5/8 of 240 cm

A 240 cm board, and you need five eighths of it. 5/8 × 240 = 1200 ÷ 8 = 150 cm. By hand: 240 ÷ 8 = 30 cm per eighth, then 30 × 5 = 150 cm. Mark the board at 150 cm and cut there; the offcut is 90 cm.

3/4 + 1/2 = 3/4 + 2/4 = 5/4 = 1 1/4 inches
2/3 of 9 litres = 6 litres
5/8 of 240 cm = 150 cm

At a glance

Two lengths joined end to end3/4 in1/2 in01 in1 1/4 in3/4 + 1/2 = 5/4 inches = 1 1/4 inches

Three quarters of an inch plus half an inch runs to one and a quarter inches on the tape.

The mistake to avoid

Reading a fraction as a decimal by eye. 3/4 of an inch is 0.75 inches, not 0.34 — the 3 and 4 are not digits after a decimal point. If a tape or a cut looks a quarter inch out, check whether a fraction was read as a decimal.

Tape measure, phone, or calculator: picking the right tool on the job

On a job, each tool has one job. The tape reads a length. The phone turns a fraction into a decimal when a machine setting needs one. The calculator keeps fractions exact through a sum, which is what a cut or a mix needs. Cutting 7/8 off a 160 cm board is a good example: divide 160 by 8 to get 20 cm per eighth, then multiply by 7 to get 140 cm, leaving a 20 cm offcut. A phone would give you 0.875 × 160 = 140, the same number, but if you then need 3/8 of the offcut, the calculator keeps it as a fraction — 3/8 of 20 cm is 7.5 cm — instead of rounding 0.375 into 0.38 and carrying the error into the next cut.

Money works the same way. A job that uses 3/5 of a ₹1,250 tin of paint uses ₹750 worth of it: 3/5 × 1,250 = 3,750 ÷ 5 = 750. Knowing the split before you open the tin tells you whether the ₹500 left is enough for a second coat, or whether a second tin has to go on the shopping list. Use the tape to measure, the calculator to work out the fraction, and the phone only for the final decimal if a shop or a machine asks for one.

Check the cut before you saw

A wrong fraction on a board is a wasted board, so check before the saw, not after. First, read the fraction as a length, not a decimal: 3/4 of an inch is 0.75 inches, and 1 1/2 inches is one and a half, not 1.2 or 1.12. Second, add the pieces on paper and compare with the tape: 1 1/2 inches plus 3/4 of an inch is 6/4 + 3/4 = 9/4, which is 2 1/4 inches. If your tape shows 2 1/4 and your sum said 1 2/3, you added 1/2 and 3/4 as 4/6 — tops and bottoms added separately — and the tape has just saved you a cut. Third, check the offcut: the piece you cut off plus the piece you keep must add back to the board you started with. If they don’t, one of the two fractions is wrong, and it is cheaper to find out now than after the saw has done its work.

Frequently asked questions

How do I add two measurements in fractions?

Use a common denominator, then add the tops. 3/4 inch + 1/2 inch is 3/4 + 2/4 = 5/4 inches, which is 1 1/4 inches.

How much paint is 2/3 of a 9-litre tin?

6 litres. 2/3 × 9 = 18 ÷ 3 = 6, so 3 litres stay in the tin.

How do I find 5/8 of a 240 cm board?

Multiply: 5/8 × 240 = 150 cm. The quick way is 240 ÷ 8 = 30 cm per eighth, then 30 × 5 = 150 cm.

What is 5/4 inches in decimal?

1.25 inches. 5 ÷ 4 = 1.25, which is one and a quarter inches — the calculator shows both forms.

More guides on the Fraction Calculator

Try it yourself

Add, subtract, multiply or divide two fractions — simplified, with the decimal value alongside.

Open the Fraction Calculator