running pace calculator — the complete guide
This is the whole guide in one place: what pace is, the formula, worked examples at three distances, the standard race distances worked out at one pace, and what counts as a good pace. If you only read one page about the Running Pace Calculator, read this one.
What pace is
Pace is how long one kilometre took you: time divided by distance. A smaller number is faster. It is usually written as minutes and seconds per kilometre — 6:00 min/km — and it is the number most training plans are built around, because it tells you how fast to run each kilometre, not just how fast you ran overall.
The formula
Pace = time ÷ distance Time = pace × distance Distance = time ÷ pace Speed = 60 ÷ pace (km/h) Pace per mile = pace per km × 1.60934
Worked examples
5 km in 25 minutes is 25 ÷ 5 = 5:00 min/km, which is 8:03 min/mile and 12.0 km/h. 10 km in 55 minutes is 55 ÷ 10 = 5:30 min/km, which is 8:51 min/mile and 10.9 km/h. 5 km in 30 minutes is 30 ÷ 5 = 6:00 min/km, which is 9:39 min/mile and 10.0 km/h.
One pace, four race distances
Hold 5:00 min/km and the standard distances work out like this: 5 km takes 25 minutes, 10 km takes 50 minutes, a half marathon (21.0975 km) takes 21.0975 × 5 = 105.5 minutes — about 1 hour 45 minutes — and a marathon (42.195 km) takes 42.195 × 5 = 211 minutes — about 3 hours 31 minutes. At 6:00 min/km, the marathon takes 42.195 × 6 = 253 minutes — about 4 hours 13 minutes — and the half takes about 2 hours 7 minutes.
At 5:00 min/km: 5K 25:00 · 10K 50:00 · half 1:45 · marathon 3:31 At 6:00 min/km: 5K 30:00 · 10K 60:00 · half 2:07 · marathon 4:13
At a glance
Each bar is the finish time at the same 5:00 min/km pace. Double the distance and the time doubles — pace is the one number that scales.
What counts as a good pace
A relaxed beginner run is often 7:00–8:00 min/km, regular runners often hold 5:30–6:30 min/km, and competitive times are under 5:00 min/km. Race day is usually quicker than training: most runners are 10–30 seconds per kilometre faster in a race than on an easy training run, helped by adrenaline, a flat measured course and other runners. And walking is the same maths — a brisk walk is about 10:00–12:00 min/km, which is 5–6 km/h.
What pace leaves out
Pace is an average, so it hides the fast and slow parts of a run — hills, traffic lights, a slow first kilometre. It also says nothing about effort: 6:00 min/km on a flat road in cool weather is easier than 6:00 min/km uphill in the heat. Treat pace as a guide to compare like with like — the same route, similar weather — not as a single score for your fitness.
The mistake to avoid
Setting a race target from a training pace without the race-day gap. If your easy runs are 6:30 min/km, a race will not magically be 5:30 — expect 10–30 seconds a kilometre quicker, not a minute. Work out the finish time from a realistic race pace, not from hope.
This calculator gives general information only — it is not medical advice. If you have a health condition, talk to a doctor before starting a running plan.
Training pace, race pace and everyday pace — which is which
Most runners have three paces, not one. Training pace is the easy-run number, often 6:30–7:30 min/km, the pace you can hold while talking. Race pace is the number you aim for on the day — 10–30 seconds a kilometre quicker than training, helped by a flat course and other runners. Everyday pace is the number on your home loop, with its hills and crossings, usually a little slower than either. Comparing them directly is a mistake: they are measured under different conditions.
Indian races make the point. A half marathon at 5:45 min/km — the kind of pace a regular runner might target at the Vedanta Delhi Half Marathon — takes 21.0975 × 5.75 = 121 minutes, about 2 hours 1 minute. A 10K at the same pace, say the TCS World 10K in Bengaluru, takes 57 minutes 30 seconds. A marathon at 6:30, a steady target for a first Tata Mumbai Marathon, takes 42.195 × 6.5 = 274 minutes, about 4 hours 34 minutes. Same runner, three races, three paces — pick the one that matches the race, not the one that matches your best day.
The one number to double-check before race week
Re-derive your finish time from your pace, and check the course distance while you are at it. A 2-hour half marathon needs 5:41 min/km, as the check above shows — if your plan says 2 hours at 6:00 pace, it is wrong by 7 minutes, because 6:00 gives 2 hours 7 minutes. And a course is not always the distance on the poster: a “10K” that measures 10.2 km takes 10.2 × 6 = 61.2 minutes at 6:00 pace — 61 minutes 12 seconds, not 60 flat.
Do this check in race week, when there is still time to adjust the target. A finish time worked out from a realistic pace and a measured distance is a plan; a finish time copied from a training run or a round number is a guess. The calculator does the arithmetic in seconds — the hard part is being honest about the two numbers you type in.
Frequently asked questions
How long does a marathon take at 5:00 min/km?
About 3 hours 31 minutes. A marathon is 42.195 km, and 42.195 × 5 = 211 minutes. At 6:00 min/km it takes about 4 hours 13 minutes.
How long does a half marathon take at 5:00 min/km?
About 1 hour 45 minutes. A half marathon is 21.0975 km, and 21.0975 × 5 = 105.5 minutes.
Why am I faster in a race than in training?
Race-day adrenaline, a flat measured course and other runners all help. Most runners are 10–30 seconds per kilometre faster in a race than on an easy training run.
Can I use the calculator for walking?
Yes — the maths is the same. A brisk walk is about 10:00–12:00 min/km, which is 5–6 km/h.
More guides on the Running Pace Calculator
- How to use the Running Pace Calculator — step by step
- Running Pace Calculator explained with worked examples
- Running Pace Calculator formula — how it actually works
- Running Pace Calculator for beginners — start here
- Common mistakes people make with the Running Pace Calculator
- Running Pace Calculator vs doing it by hand — which is faster?
- How to get an accurate result from the Running Pace Calculator
- Running Pace Calculator for students — with examples
- Running Pace Calculator for homeowners and DIYers
A free calculator that works out your pace, finish time or distance from the other two numbers, in min/km and min/mile.