← All tools/Calculators/Geometry/Ellipse Area Calculator

Ellipse Area Calculator

The area of an ellipse from its two semi-axes.

Ellipse area

—

Ellipse
Bounding rectangle

How it works

Area = π × a × b

The formula multiplies π by the two semi-axes. The semi-major axis, a, is half the ellipse’s longest width, measured from the centre to the farthest point on the edge; the semi-minor axis, b, is half the shortest width, from the centre to the nearest point on the edge. Both must share one unit — centimetres, metres or inches — and the answer comes out in square units of that unit. The formula applies to any true ellipse, from a nearly round one to a long, flat one. It does not apply to egg shapes or freehand ovals, which are not ellipses and have no single pair of axes.

Worked example: a = 5 and b = 3 gives π × 5 × 3 = 47.12 square units — about 78.5% of the 60-square-unit bounding rectangle.

Second worked example: an elliptical garden bed has semi-axes a = 8 m and b = 5 m. Area = π × 8 × 5 = 3.14159 × 40 = 125.66 square metres. Its bounding rectangle is 16 m by 10 m, or 160 square metres, so the bed covers 125.66 ÷ 160 = 78.54% of the rectangle — the same share as any ellipse, whatever its size.

What the result means

An ellipse always covers the same share of the rectangle drawn around it: π ÷ 4, or about 78.5%. That is why the first example (47.12 out of 60) and the garden bed (125.66 out of 160) give nearly the same percentage — only the size changes, never the share. Use that to sanity-check any answer: more than the rectangle, or far below three-quarters of it, means something is wrong. In practice, the area tells you how much material a shape needs — turf and soil for a bed, glass for a tabletop, or paint for a ceiling medallion. The commonest mistake is entering the full diameters instead of the semi-axes: diameters of 16 and 10 give π × 16 × 10 = 502.65, exactly four times the true area, so always halve each width first.

Frequently asked questions

What are the semi-major and semi-minor axes?

The semi-major axis is half the longest diameter of the ellipse, measured from the centre to the farthest point on the edge, and the semi-minor axis is half the shortest diameter, from the centre to the nearest point. On a typical ellipse the semi-major axis runs along the longer direction and the semi-minor across the shorter one, at right angles to each other.

What if a and b are equal?

Then the ellipse is a circle, and the formula becomes π × a², which is the ordinary circle area. That is a useful check: type the same number for both axes and the calculator should give the circle area for that radius. As a and b drift apart, the shape stretches and the area falls below the circle area for the same a.

Which units does the answer use?

Square units of whatever unit you measured a and b in — square centimetres if a and b are in centimetres, square metres if they are in metres, and square inches if they are in inches. The two axes must share one unit; if one is in feet and the other in inches, convert one of them first or the answer will be meaningless.

What happens if I swap a and b?

Nothing changes — the area stays exactly the same, because multiplication does not care about order and π × a × b equals π × b × a. By convention a is the longer semi-axis and b the shorter one, but the calculator accepts either order and gives the same result, so do not worry if you are unsure which of your two measurements is which.

How do I measure the axes of a real ellipse?

Measure the longest width right across the shape and halve it for a, then measure the shortest width across the middle and halve it for b. For a garden bed, run a tape across the widest point and then across the narrowest point at right angles to it. Measure through the centre both times, and keep both measurements in the same unit.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.