PPF Calculator formula — how it actually works
The PPF Calculator is not guessing. It uses the future value of an annuity due — a standard formula for a fixed deposit made at the start of each year, with interest compounded annually. This page takes the formula apart, explains each piece, and works it through with real numbers.
The formula looks long, but it has only three inputs: P, the yearly deposit; r, the interest rate as a decimal; and n, the number of years.
The formula
Maturity = P × (((1 + r)ⁿ − 1) ÷ r) × (1 + r) P = yearly deposit, r = rate ÷ 100, n = years
Each part has a job. (1 + r)ⁿ grows one rupee over n years at the rate r. Subtracting 1 and dividing by r turns that growth into the value of a deposit made at the end of each year. The final × (1 + r) adjusts for deposits made at the start of the year instead — each deposit gets one extra year of interest.
Worked example — ₹1,50,000 a year, 7.1%, 15 years
First convert the rate: r = 7.1 ÷ 100 = 0.071. Then work out (1.071)¹⁵, which is 2.797964 — one rupee grows to about ₹2.80 in 15 years at 7.1%. Subtract 1 to get 1.797964, divide by 0.071 to get 25.3234, and multiply by 1.071 for the start-of-year adjustment to get 27.1214. That number is the multiplier: every rupee deposited each year is worth ₹27.12 at maturity.
Multiply by the deposit: 27.1214 × ₹1,50,000 = ₹40,68,209. Deposits total 15 × ₹1,50,000 = ₹22,50,000, so the interest is ₹40,68,209 − ₹22,50,000 = ₹18,18,209.
(1.071)¹⁵ = 2.797964 (2.797964 − 1) ÷ 0.071 = 25.3234 25.3234 × 1.071 = 27.1214 27.1214 × ₹1,50,000 = ₹40,68,209
At a glance
Deposits ₹22,50,000 (55%) · Interest ₹18,18,209 (45%) · Total ₹40,68,209
₹1,50,000 a year for 15 years at 7.1%: ₹22,50,000 of deposits and ₹18,18,209 of interest.
The mistake to avoid
The most common error is leaving out the final × (1 + r). Without it, the formula gives the value of deposits made at the end of each year: ₹37,98,515 instead of ₹40,68,209 — nearly ₹2,70,000 less. The difference is real money: a deposit made on 5 April earns a full year of interest that an end-of-year deposit never gets. If your hand calculation comes out lower than the tool by about 7%, check for that missing factor first.
Rate note: these figures use 7.1% a year, the PPF rate in force since 1 April 2020. The rate is reviewed every quarter, so check nsiindia.gov.in before relying on a figure. Last updated November 2026.
This is a worked example, not financial advice.
Frequently asked questions
What is the PPF maturity formula?
Maturity = P × (((1 + r)ⁿ − 1) ÷ r) × (1 + r), where P is the yearly deposit, r is the rate as a decimal and n is the number of years. With P = ₹1,50,000, r = 0.071 and n = 15, it gives ₹40,68,209.
Why does the formula have the extra × (1 + r) at the end?
Because deposits are made at the start of each year, so each one earns one extra year of interest compared with an end-of-year deposit. Leaving it out understates the maturity by about 7% — ₹37,98,515 instead of ₹40,68,209 for the maximum deposit.
What does (1.071)¹⁵ = 2.797964 mean in plain words?
One rupee left alone at 7.1% for 15 years grows to about ₹2.80. The rest of the formula turns that single-rupee growth into the value of a rupee deposited every year.
Does the formula work if the rate changes during the 15 years?
No — it assumes one fixed rate for the whole tenure. In reality the PPF rate is reviewed every quarter. The calculator’s result is an estimate at the rate you enter, not a promise of what the rate will be.
More guides on the PPF Calculator
- How to use the PPF Calculator — step by step
- PPF Calculator explained with worked examples
- PPF Calculator for beginners — start here
- Common mistakes people make with the PPF Calculator
- PPF Calculator vs doing it by hand — which is faster?
- ppf calculator — the complete guide
- How to get an accurate result from the PPF Calculator
- PPF Calculator for students — with examples
- PPF Calculator for homeowners and DIYers
A free calculator that works out what yearly PPF deposits grow to over the tenure, at the rate you choose.