Gratuity Calculator: inputs, outputs and what the answer means
The Gratuity Calculator estimates the lump sum an employee receives on leaving after at least five years of continuous service, using the standard formula under the Payment of Gratuity Act: last drawn salary multiplied by 15/26, multiplied by years of service. This is an estimate for planning, not a legal determination, and the final amount depends on the employer’s records and the rules that apply to the case.
Free versus paid tools: what you really need
For this job, a free browser tool covers what most people need: enter the numbers, get the answer, leave. Paid tools add extras — saved history, reports, integrations — that matter only if you do this job every day or need a formal record.
The question to ask before paying is simple: what would the paid version do that this tool does not, and would you use that feature often enough to justify it? If the answer is a feature you would use once, the free tool is the right choice.
One thing to check in any free tool is whether it asks for an account or uploads your data. This one does neither, which is the right default for a calculation involving your personal numbers.
Worked example
Take a last drawn salary of ₹50,000 and 12 years of service. First, ₹50,000 × 15 ÷ 26 = ₹28,846. Then ₹28,846 × 12 = ₹3,46,154. That is the estimate for those inputs — a single salary figure and a single service figure, with every step visible.
A second case shows how service length drives the result. With a salary of ₹35,000 and 7 years, ₹35,000 × 15 ÷ 26 = ₹20,192, and ₹20,192 × 7 = ₹1,41,346. Five fewer years and a lower salary together cut the amount by more than half compared with the first case.
Gratuity = Last drawn salary × 15 ÷ 26 × Years of service. (This is an estimate, not financial or legal advice.)
At a glance
Two parts of the same result, shown side by side so the balance is visible at a glance. The exact figures are in the worked example above.
Gratuity Calculator or the HR figure — which one to trust
The calculator and your employer’s HR department should land on the same number, because both use the same formula: last drawn salary × 15 ÷ 26 × years of service. When they differ, the difference is almost always in the inputs, not in the maths. The calculator is the faster way to check a figure you have been given, and the HR figure is the one that gets paid — so use the calculator as a check, not as a replacement for the official calculation.
Try two more cases. An employee with a last drawn salary of ₹60,000 and 20 years of service gets ₹60,000 × 15 ÷ 26 = ₹34,615 a month of gratuity base, and ₹34,615 × 20 = ₹6,92,308 in total. An employee with a salary of ₹50,000 and the same 20 years gets ₹50,000 × 15 ÷ 26 = ₹28,846, and ₹28,846 × 20 = ₹5,76,923. The second person earns ₹10,000 a month less, and over 20 years that gap is worth ₹1,15,385 of gratuity — service length multiplies every rupee of salary.
If the HR figure is lower than the calculator’s, ask which salary figure was used and how many years were counted. A common gap is dearness allowance left out of the salary, or a year of service rounded down.
What to check before you accept the amount
Four checks cover most gratuity disputes. First, the five-year rule: gratuity under the Payment of Gratuity Act generally needs at least five years of continuous service with the same employer, so four and a half years usually gives nothing under that formula — check the exact service dates, including any breaks. Second, the salary: last drawn salary normally means basic salary plus dearness allowance, not the full cost-to-company figure, so a CTC of ₹80,000 a month does not mean a gratuity salary of ₹80,000.
Third, the years of service: the Act counts completed years, and how a part-year is treated can move the total by tens of thousands of rupees on a long career — confirm whether your employer counts six months and above as a full year. Fourth, the tax position: tax treatment depends on the type of employer and the amount, and limits change over time, so check the current rules or ask a tax professional rather than assuming the whole amount is tax-free. This calculator gives an estimate for planning, not a legal determination, and the final amount depends on the employer’s records and the rules that apply to the case.
Frequently asked questions
Who is eligible for gratuity?
Generally, an employee who has completed at least five years of continuous service with the same employer, on resignation, retirement or termination under the applicable rules.
Is the full amount tax-free?
Tax treatment depends on the type of employer and the amount, and limits change over time. Check the current rules or ask a tax professional for your case.
What counts as last drawn salary?
Basic salary plus dearness allowance. Other allowances are normally not included in this formula.
More guides on the Gratuity Calculator
- How to use the gratuity calculator step by step
- How to calculate gratuity calculator in 2 minutes
- Gratuity calculator formula explained in plain english
- 5 real-life examples using the gratuity calculator
- Gratuity calculator for beginners: what each input means
- Common mistakes when working out gratuity calculator
- Gratuity calculator worked example with real numbers
- How accurate is a gratuity calculator estimate
- Gratuity calculator checklist: get the result right first time
Work out the gratuity payable for years of service from last drawn salary, with the standard formula shown.