← All blog posts

How to use the FD Calculator — step by step

WhiteUI · A plain-English guide to the FD Calculator

The FD Calculator needs three numbers and gives you two back. You type in your deposit, the yearly interest rate and the number of years, and it tells you what the deposit grows to — the maturity value — and how much of that is interest. Nothing else is needed.

The three steps

  • Step 1 — Deposit. Type in the lump sum you plan to put in, for example ₹1,00,000. This is the money that is yours from the start.
  • Step 2 — Interest rate. Type in the yearly rate as a plain number, for example 7 for 7% a year. Check your bank’s current rate first — rates change, and an old rate gives an old answer.
  • Step 3 — Years. Type in how long the money stays in, for example 5. The calculator assumes the interest is compounded quarterly, four times a year, which is how most Indian banks work it out.

The result appears straight away: the maturity value in large type, and the interest underneath it. Change any of the three numbers and the answer updates at once, so you can compare a 3-year deposit with a 5-year one without starting over.

Worked example

Take a deposit of ₹1,00,000 at 7% a year for 5 years, compounded quarterly. The rate each quarter is 7 ÷ 4 = 1.75%, and there are 4 × 5 = 20 quarters. So the maturity value is ₹1,00,000 × (1.0175)^20. That power works out to 1.414778, which gives ₹1,41,478. The interest is ₹1,41,478 − ₹1,00,000 = ₹41,478.

Maturity = ₹1,00,000 × (1 + 0.07 ÷ 4) ^ (4 × 5)
         = ₹1,00,000 × (1.0175) ^ 20
         = ₹1,00,000 × 1.414778
         = ₹1,41,478
Interest = ₹1,41,478 − ₹1,00,000 = ₹41,478

At a glance

Maturity ₹1,41,478Deposit ₹100,000Interest ₹41,478The purple part is your money. The green part is what the bank adds.

₹1,00,000 at 7% for 5 years, compounded quarterly. Most of the maturity value is your own deposit; ₹41,478 of it is interest.

The mistake to avoid

The most common slip is typing the rate as a decimal — 0.07 instead of 7. The calculator expects a plain percent, so 0.07 would be read as 0.07% a year and the answer would come out almost unchanged from the deposit. The second slip is typing months instead of years: 60 months is 5 years, not 60. If your answer looks far too big or far too small, check those two boxes first.

This is a maths tool, not financial advice. Rates are examples only — check your bank’s current rate before you decide anything.

Frequently asked questions

What three numbers does the calculator need?

Your deposit, the yearly interest rate as a plain number (7 for 7%), and the number of years. Those three are enough to work out the maturity value and the interest.

Does it use simple or compound interest?

Compound interest, compounded quarterly. The maturity value is deposit × (1 + rate ÷ 4 ÷ 100) ^ (4 × years), so each quarter’s interest starts earning interest of its own.

Why is my maturity value different from my bank’s quote?

Usually the rate or the compounding frequency differs. Check your bank’s current rate — rates change — and remember this page shows the gross figure before tax, with no TDS taken off.

Can I use it for a deposit I already made?

Yes. Enter the original deposit, the rate it was booked at, and the full term to see what it matures to. To see what is left, enter the current value as the deposit and the remaining years as the term.

More guides on the FD Calculator

Try it yourself

A free calculator that works out what a fixed deposit grows to, and how much of it is interest.

Open the FD Calculator