← All tools/Calculators/Everyday/Charging Time Calculator

Charging Time Calculator

How long your phone, laptop or power bank takes to charge, from its battery and your charger.

mAh
mA
%
%
%

Time to reach your target

—

How it works

Charging time (hours) = battery capacity (mAh) ÷ charger output (mA) ÷ charging efficiency.
Time to a target charge = full time × (target % − current %) ÷ 100.
Efficiency is below 100% because some energy is lost as heat; 85% is a typical value.

Worked example: a 5,000 mAh battery on a 2,000 mA charger at 85% efficiency takes 5,000 ÷ 2,000 ÷ 0.85 = 2.94 hours — about 2 hours 56 minutes — from empty to full. From 20% to 100% it is 2.94 × 80 ÷ 100 = 2.35 hours, about 2 hours 21 minutes.

Frequently asked questions

Why is the efficiency less than 100%?

Charging loses energy as heat in the charger, the cable and the battery itself. 85% is typical; fast charging is often less efficient, closer to 75–80%.

Does a bigger charger always charge faster?

Only up to the device’s limit — a phone that accepts 25 W will not charge faster on a 65 W charger. Enter the charger output your device actually draws, not the charger’s maximum.

Why does the last 20% take longer?

Most devices slow down near full charge to protect the battery. This calculator assumes a steady rate, so the real time from 80% to 100% is usually a bit longer than shown.

What if my charger is rated in watts?

Divide watts by volts to get amps: a 25 W charger at 5 V gives 5 A, which is 5,000 mA. Most USB chargers run at 5 V, 9 V or 12 V depending on the fast-charging mode.

Is this exact?

No — it is an estimate from the numbers you enter. Real charging varies with battery age, temperature and the device’s own charge curve.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.