How to use a cooking time calculator
The Cooking Time Calculator on this site has three inputs and three answers. You type in the weight, the minutes per kilo and the resting time, and it returns the cooking time, the resting time and the total, with the split shown as a bar. This guide walks through each input with real numbers, so you can use the tool with confidence the first time. Open the Cooking Time Calculator and follow along.
Input 1: weight
The first input is the weight of the joint in kilos. The page starts at 2 kg, and you can type a new number or drag the slider, which runs from 0.1 kg to 20 kg. The number box and the slider stay in step, so changing either one updates the other. Weigh the joint raw on kitchen scales and type the number in as it is. If your scales read in pounds, divide by 2.2 first: a 4.4 lb joint is 2 kg. The weight is the input the whole calculation hangs on, so it is worth getting right.
Input 2: minutes per kilo
The second input is the rate: how many minutes of cooking each kilo needs. The page starts at 45 minutes per kilo, and the slider runs from 10 to 120. This is the number that carries the recipe’s judgement: a fast roast at a hot oven uses a lower rate, and a slow roast uses a higher one. If your recipe gives a rate, type it in. If it does not, 45 is a sensible starting point for a whole roast. Change the rate and watch the cooking time move: at 60 minutes per kilo, a 2 kg joint cooks for 120 minutes, and at 40 it cooks for 80.
Input 3: resting time
The third input is the resting time in minutes: how long the joint sits out of the oven before carving. The page starts at 20 minutes, and the slider runs from 0 to 60. Twenty minutes is a good default for a roast of around 2 kg; a small joint can rest for 15. The resting time is added to the cooking time, never multiplied, so changing it moves the total by exactly that many minutes. Set it to 0 and the total equals the cooking time — but the joint will be drier for it.
Reading the three answers
The big number is the total time, shown in hours and minutes: with the default inputs it reads 1 h 50 min. Under it, three lines break the total down: the cooking time, 1 h 30 min, with the working shown as 2 kg times 45 min/kg; the resting time, 20 min; and the total from oven to table, 1 h 50 min. Under those lines, a bar shows the split: the purple part is the cooking time and the green part is the resting time, with the two labelled underneath. All three numbers come from the same three inputs, so they always agree.
Three tries to learn it
Try three inputs and watch the pattern. First, leave the defaults alone: 2 kg at 45 minutes per kilo with 20 minutes of resting gives 1 h 50 min. Second, change the weight to 3 kg: the cooking time becomes 135 minutes and the total becomes 155 minutes, or 2 h 35 min, while the resting time stays at 20. Third, change the rate to 60: the cooking time becomes 120 minutes and the total becomes 140 minutes, or 2 h 20 min. The first two tries show the weight rule in action, and the third shows the rate rule: a bigger joint adds cooking time, and a higher rate does too.
What the calculator does not do
The calculator works out numbers from the values you type in. It does not measure a real joint, and it does not know your oven: there is no box for temperature, because the temperature lives inside the rate you choose. It is a planning tool, not a substitute for a thermometer. Use the time it gives as a guide for when to start checking, and use a thermometer for the final check. It also only accepts kilos: a weight in pounds needs dividing by 2.2 before you type it in.
Frequently asked questions
What are the default values?
2 kg, 45 minutes per kilo and 20 minutes of resting, which gives 90 minutes of cooking and a total of 1 hour 50 minutes.
How do I change the weight?
Type a new number in the weight box, or drag the slider. The slider runs from 0.1 kg to 20 kg, and the two stay in step.
What does the coloured bar show?
The split of the total time: the purple part is the cooking time and the green part is the resting time, with both labelled underneath.
Can I use pounds instead of kilos?
Not directly. Divide the weight in pounds by 2.2 to get kilos first: a 4.4 lb joint is 2 kg.
More guides on the Cooking Time Calculator
- How to calculate cooking time
- Cooking Time formula explained simply
- Cooking Time: worked example step by step
- Cooking Time for beginners
- Common mistakes when calculating cooking time
- Cooking Time vs roasting temperature: what's the difference
- Cooking Time quick reference table
- Cooking Time in real life: everyday examples
- Cooking Time practice questions with answers
Try the Cooking Time Calculator — free, in your browser.