How to use a pH calculator
The pH Calculator on this site has two starting points and three answers. You can start from a pH value, or from a hydrogen ion concentration, and either way it returns the pH, the pOH and the concentration, plus a label saying acidic, neutral or alkaline. This guide walks through both modes with real numbers, so you can use the tool with confidence the first time. Open the pH Calculator and follow along.
Mode 1: start from a pH value
Choose “pH value” at the top of the tool. Type a number from 0 to 14, or drag the slider to it. The page starts at pH 7, which is pure water, and shows pOH 7, [H⁺] = 1.00 × 10⁻⁷ mol/L and the label “Neutral”. Move the slider to 3 and the answers change at once: pOH 11, [H⁺] = 1.00 × 10⁻³ mol/L and “Acidic”. Move it to 10 and you get pOH 4, [H⁺] = 1.00 × 10⁻¹⁰ mol/L and “Alkaline”. The slider and the number box stay in step, so either one sets the value.
Mode 2: start from a concentration
Choose “Hydrogen ion concentration” instead, and type [H⁺] in moles per litre. Type 0.01 and the tool returns pH 2, pOH 12 and the label “Acidic”. Type 0.001 and it returns pH 3. Type 0.0000001 and it returns pH 7, “Neutral”. The slider under the box shows −log₁₀[H⁺], which is the pH itself, so dragging it to 4 sets the concentration to 0.0001 mol/L. A concentration of zero or less is not accepted: the tool asks for a number above zero, because the log of zero does not exist.
Reading the three answers
The big number is the pH, from 0 to 14. Under it, the pOH is 14 minus the pH, and the concentration is shown in scientific notation, such as 1.00 × 10⁻³ mol/L. The label is the plain-English reading: below 7 is “Acidic”, 7 is “Neutral” and above 7 is “Alkaline”. A marker on the scale under the answers shows where your pH sits. All three numbers come from the same input, so they always agree: a pH of 3 always pairs with pOH 11 and [H⁺] = 1.00 × 10⁻³ mol/L.
Three tries to learn it
Try three inputs and watch the pattern. First, type a concentration of 0.1 mol/L: the pH is 1, a strong acid. Second, type 0.001 mol/L: the pH is 3, about the strength of vinegar — a hundred times weaker, two steps up. Third, type 0.0000001 mol/L: the pH is 7, pure water. The first two tries show the tenfold rule in action: a hundredfold change in concentration moves the pH by 2. Once you have seen it move, the scale stops being abstract.
What the calculator does not do
The calculator works out numbers from the value you type in. It does not measure a real sample: for that you need a pH meter, test paper or an indicator solution. It is informational only, for learning and checking homework, not a substitute for laboratory measurement. It also assumes room temperature, where pH and pOH add to 14, and it only accepts concentrations in moles per litre — a value in millimoles per litre needs dividing by 1,000 first.
Try the slider in both modes
The sliders are the fastest way to learn the scale. In pH mode, drag from 0 to 14 and watch the pOH move in the opposite direction: at pH 2 the pOH is 12, at pH 7 it is 7, and at pH 12 it is 2. In concentration mode, drag the slider and watch the concentration change by powers of ten: each whole step on the slider divides [H⁺] by 10. The marker on the scale follows your value, so you can see at a glance whether you are in acidic, neutral or alkaline territory.
Frequently asked questions
Which mode should I start with?
Start from a pH value if you know the pH, and from a concentration if you know [H⁺] in mol/L. Both modes return the same three answers.
What does the slider do in concentration mode?
It shows −log₁₀[H⁺], which is the pH. Dragging it to 4 sets the concentration to 0.0001 mol/L.
Why does the calculator reject zero?
Because the log of zero does not exist. A concentration must be above zero for a pH to be calculated.
Can I use the calculator for a real sample?
Only as a check. It calculates from the number you type in; measuring a real sample needs a pH meter or indicator.
More guides on the pH Calculator
Try the pH Calculator — free, in your browser.