← All tools/Calculators/Chemistry/Percent Concentration Calculator

Percent Concentration Calculator

Work out a solution’s percent concentration by mass from solute and solution masses.

g
g

Concentration (mass %)

—

Solute
Solvent

How it works

Concentration (% w/w) = (mass of solute / mass of solution) × 100
Mass of solvent = mass of solution − mass of solute

The percentage by mass tells you how much of a solution is solute — the substance dissolved — and how much is solvent, the liquid doing the dissolving. The mass of the solute is in grams, and the mass of the solution is the solute plus the solvent together, also in grams; both must be in the same unit, or the ratio is meaningless. Dividing the solute by the solution and multiplying by 100 gives grams of solute per 100 grams of solution, which is what “% w/w” means — weight per weight. The second line is the bookkeeping: whatever is not solute must be solvent, so subtracting gives the solvent mass. The formula assumes the masses add up simply, which is true for solids dissolved in liquids at ordinary concentrations. It does not apply where volume is the natural measure — a splash of ethanol in water is usually quoted as % v/v, by volume — or where the density changes enough that grams and millilitres stop matching.

Worked example: 10 g of salt in 200 g of solution gives 10 / 200 × 100 = 5.00% w/w, with 190 g of solvent.

Second worked example: making sugar syrup in an Indian kitchen — 25 g of sugar stirred into water until the syrup weighs 500 g in total. The concentration is 25 ÷ 500 × 100 = 5.00% w/w, and the water in it is 500 − 25 = 475 g. Double the sugar to 50 g in the same 500 g of syrup and the concentration doubles to 10.00% w/w, with 450 g of water left.

What the result means

A 5% solution sounds weak, but it means 5 g in every 100 g — a litre of it carries about 50 g of solute, which is a lot for a medicine or a fertiliser. The figure matters most when a dose depends on it: a 0.9% salt solution is the saline used in hospitals, and a 5% error in mixing it changes the salt a patient receives. In the kitchen the same arithmetic decides whether a pickle brine is strong enough to preserve or a syrup sweet enough to set. Two checks keep the numbers honest. First, the solute can never weigh more than the solution — if it does, one of the two masses is wrong. Second, the solvent mass plus the solute mass must equal the solution mass exactly; if they do not add up, something was weighed twice or missed.

Frequently asked questions

What does % w/w mean?

Weight per weight: grams of solute per 100 grams of solution. A 5% w/w solution has 5 g of solute in every 100 g of solution.

Is solute mass ever larger than solution mass?

No — the solution includes the solute, so its mass is always at least the solute mass. If your numbers say otherwise, one of them is wrong.

How is this different from molarity?

Percent by mass needs no volume or molar mass; molarity counts moles per litre of solution and needs both.

What is % w/v, and how is it different from % w/w?

% w/v is grams of solute per 100 mL of solution, rather than per 100 g. The two agree only when the solution’s density is 1 g/mL, like dilute salt water; for a dense syrup they differ, so always check which one a recipe or a label means.

How do I make 500 g of a 10% salt solution?

Weigh 50 g of salt — 10% of 500 g — then add water until the total mass is 500 g, which means 450 g of water. Do not add 500 g of water to 50 g of salt, or you will have 550 g of solution at about 9.09% instead.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.