Molecular Weight: worked example step by step
The best way to learn a calculation is to watch one done slowly, with every step shown. This post works through sulphuric acid, H₂SO₄, line by line — the same example the Molecular Weight Calculator uses — and then repeats the method on glucose so you can see the pattern hold for a bigger molecule.
Step 1: list the atoms
Read the formula H₂SO₄ and write down what is in it. H has a subscript 2, so two hydrogens. S has no number, so one sulphur. O has a subscript 4, so four oxygens. That is the whole inventory: 2 H, 1 S, 4 O. Writing this list down first is worth doing every time — it stops you carrying a wrong count into the arithmetic, which is the most common way these calculations go wrong.
Step 2: look up the atomic weights
From the periodic table, or from the calculator’s built-in table: hydrogen 1.008, sulphur 32.065, oxygen 15.999. These are the standard values the calculator uses, so an answer worked out by hand with them should match the calculator exactly. If you use rounded values — H 1, S 32, O 16 — you will get 98 instead of 98.08, close enough for a rough check but not the exact figure. The values come from the standard table the calculator uses, so there is no need to hunt for a different source — one table, used consistently, keeps hand working and calculator answers in agreement.
Step 3: multiply each weight by its count
Hydrogen: 2 × 1.008 = 2.016. Sulphur: 1 × 32.065 = 32.065. Oxygen: 4 × 15.999 = 63.996. Three small multiplications, each on its own line, so a slip in one does not corrupt the others. Notice that the oxygen line dominates the total — four heavy atoms outweigh the two hydrogens by more than thirty to one — which is normal: in most molecules the heavier elements do most of the weighing.
Step 4: add the parts
2.016 + 32.065 + 63.996 = 98.077, which rounds to 98.08 g/mol. That is the molecular weight of sulphuric acid, and it matches the calculator’s answer exactly. One mole of sulphuric acid — 6.022 × 10²³ molecules — weighs 98.08 grams.
A second example: glucose
Glucose, C₆H₁₂O₆, is bigger but the method is identical. Carbon: 6 × 12.011 = 72.066. Hydrogen: 12 × 1.008 = 12.096. Oxygen: 6 × 15.999 = 95.994. Add them: 72.066 + 12.096 + 95.994 = 180.156, or 180.16 g/mol. The steps are the same four — list, look up, multiply, add — whether the molecule has three atoms or twenty-four. Once you can do sulphuric acid, you can do any formula.
A third example with brackets
Calcium hydroxide, Ca(OH)₂, tests the bracket rule. List the atoms first: one calcium, and the OH group twice, so two oxygens and two hydrogens. Calcium: 1 × 40.078 = 40.078. Oxygen: 2 × 15.999 = 31.998. Hydrogen: 2 × 1.008 = 2.016. Add them: 40.078 + 31.998 + 2.016 = 74.092, or 74.09 g/mol. The same four steps handled the brackets without any new maths — the group was just listed as two oxygens and two hydrogens before the multiplying began.
Check yourself with table salt
Try one on your own before moving on: sodium chloride, NaCl. Sodium is 22.99, chlorine is 35.45, both appear once, so the answer is 22.99 + 35.45 = 58.44 g/mol. Type NaCl into the calculator and compare. If the numbers agree, you have the method; if not, check your counts first, then your atomic weights. Then try ammonia, NH₃: 14.007 + 3 × 1.008 = 17.031, or 17.03 g/mol. Two checks that agree mean the method is solid; one that disagrees tells you exactly where to look.
Frequently asked questions
Why start by listing the atoms?
Because a wrong count makes every later step wrong. Writing “2 H, 1 S, 4 O” first takes ten seconds and catches the most common mistake.
Should I round during the calculation?
No. Keep three decimals until the final answer, then round to two. Rounding early, especially on the small hydrogen line, shifts the answer.
How do I know my answer is right?
Check it against the calculator, or against the rough size: sulphuric acid should be near 98, glucose near 180. An answer ten times too big or small means a subscript error.
What if the formula has brackets?
Work out the bracket group first, then multiply it by the number outside. Ca(OH)₂ is Ca plus two lots of (O + H): 40.078 + 2 × 17.007 = 74.09 g/mol.
More guides on the Molecular Weight Calculator
- How to calculate molecular weight
- Molecular Weight formula explained simply
- Molecular Weight for beginners
- Common mistakes when calculating molecular weight
- Molecular Weight vs molar mass: what's the difference
- How to use a molecular weight calculator
- Molecular Weight quick reference table
- Molecular Weight in real life: everyday examples
- Molecular Weight practice questions with answers
Try the Molecular Weight Calculator — free, in your browser.