← All blog posts

Salary Raise formula explained simply

WhiteUI · A plain-English guide to the Salary Raise Calculator

The salary raise formula is one short line, and every part of it does a job. Written out, it is new salary = current salary × (1 + raise%). It turns two numbers — a salary and a percentage — into a single answer: what you will be paid after the raise. This guide takes the formula apart piece by piece, so each part makes sense before you use it. The Salary Raise Calculator uses the same formula, and you can check any of its answers with the steps here.

The salary raise formula in three pieces: current salary 60,000 rupees, multiplier 1.10, new salary 66,000 rupees
Each part of the formula does one job: the current salary is the start, the multiplier adds the raise, and the result is the new salary.

Piece 1: the current salary

The current salary is the amount you earn now, per month, before the raise. It is the only piece measured in rupees, and it sets the scale of the answer: double the current salary and the raise in rupees doubles too, even though the percentage stays the same. In the worked example it is ₹60,000 a month, a round number that makes the multiplication easy to follow. Enter whichever figure the raise applies to — usually gross monthly pay — and read the result in the same terms, because a raise on gross pay does not raise take-home pay by the same amount after tax.

Piece 2: the raise as a decimal

The second piece is the raise, written as a decimal. A raise of 10% becomes 0.10, a raise of 8% becomes 0.08 and a raise of 15% becomes 0.15. Divide the percentage by 100, or just move the decimal point two places left. This step is where most slips happen, because using 10 instead of 0.10 in the formula gives a nonsense answer eleven times too large.

new salary = current salary × (1 + raise%)
increase = new salary − current salary

Piece 3: the multiplier (1 + rate)

The third piece is (1 + rate), the multiplier. The 1 keeps your current salary intact, and the rate adds the raise on top: at 10%, every rupee of salary becomes ₹1.10. A rate of 8% gives a multiplier of 1.08, a rate of 12% gives 1.12, and a rate of 20% gives 1.20. The multiplier is the whole calculation in one number, and it is the fastest way to compare raises: a bigger multiplier always means a bigger new salary on the same starting pay, and the gap between two multipliers is the gap between two offers.

Putting the pieces together

Run one full calculation with the pieces in place. Current salary: ₹60,000 a month. Raise: 10%, so the decimal is 0.10 and the multiplier is 1.10. Multiply: ₹60,000 × 1.10 = ₹66,000 a month. Then the increase on its own: ₹66,000 − ₹60,000 = ₹6,000 a month, or ₹72,000 a year. Three pieces, one multiplication, and every answer on the calculator follows the same path. Change any one input and only the pieces that use it move: a higher raise lifts the multiplier, and a higher salary lifts the whole result.

Two more examples

Try the formula on different numbers to see the pieces move. Take ₹60,000 at 8%: the multiplier is 1.08, so the new salary is ₹60,000 × 1.08 = ₹64,800, with an increase of ₹4,800 a month. Now take a higher salary at a lower rate: ₹85,000 at 5% gives a multiplier of 1.05, so the new salary is ₹85,000 × 1.05 = ₹89,250, with an increase of ₹4,250 a month. The second example earns more in total but gains less from the raise, because the percentage is smaller. That is the point the formula makes plain: the new salary depends on both numbers, never on one alone.

Working backwards: what percentage is this raise?

Sometimes you know the two salaries and want the percentage. The formula for that is raise% = (new salary − current salary) ÷ current salary × 100. If your salary goes from ₹60,000 to ₹72,000, the increase is ₹12,000, and ₹12,000 ÷ ₹60,000 = 0.20, which is a 20% raise. If it goes from ₹60,000 to ₹69,000, the increase is ₹9,000, and ₹9,000 ÷ ₹60,000 = 0.15, which is a 15% raise. Working backwards is useful when an offer quotes only the new salary, because the percentage is what lets you compare it with the raise you already have.

Frequently asked questions

What is the salary raise formula?

New salary = current salary × (1 + raise%). For ₹60,000 at 10%, that is ₹60,000 × 1.10 = ₹66,000 a month.

What does (1 + rate) mean?

It is the multiplier. The 1 keeps your current salary, and the rate adds the raise: at 10%, every rupee becomes ₹1.10.

How do I find the percentage from two salaries?

Subtract the old salary from the new one, divide by the old salary and multiply by 100. ₹60,000 to ₹72,000 is a 20% raise.

Does the formula include tax or bonuses?

No. It covers the salary change only. A raise on gross pay does not raise take-home pay by the same amount after tax.

More guides on the Salary Raise Calculator

Try it yourself

Try the Salary Raise Calculator — free, in your browser.

Open the Salary Raise Calculator