← All blog posts

Markup cheat sheet

WhiteUI · A plain-English guide to the Markup Calculator

Keep this page open while you price products and you will rarely need to calculate. It lists the price, profit and margin for every common markup on ₹100 of cost, plus the conversions between markup and margin, so you can look a number up instead of working it out. The Markup Calculator gives the same numbers for any cost, including the ones between the rows.

A cheat sheet table: markup on 100 rupees of cost, from 10 percent markup giving a 110 rupee price to 100 percent giving 200 rupees
Markup on ₹100 of cost, at a glance: 10% is ₹110, 50% is ₹150, 100% is ₹200 — and the margin is always smaller.

The table: markup on ₹100 of cost

MarkupPriceProfitMargin
10%₹110₹109.09%
20%₹120₹2016.67%
25%₹125₹2520%
33.33%₹133.33₹33.3325%
50%₹150₹5033.33%
100%₹200₹10050%

Read the table top to bottom and two patterns stand out. First, the profit column is the markup itself in rupees, because the cost is ₹100: a 25% markup on ₹100 earns ₹25. Second, the margin column is always smaller than the markup column, and the gap widens as the markup grows — at 10% markup the margin is 9.09%, only a point behind, but at 100% markup the margin is 50%, a full 50 points behind.

How to use the table for any cost

The table is built on ₹100 of cost, and it scales to any cost by multiplying. A product costing ₹400 at 25% markup sells for four times the table’s price: 4 × ₹125 = ₹500, with a profit of 4 × ₹25 = ₹100 and the same 20% margin. A product costing ₹1,000 at 50% markup sells for ten times the table’s price: 10 × ₹150 = ₹1,500, with a profit of ₹500 and the same 33.33% margin. The percentages never change when the cost changes — only the rupees grow. So look up the row, multiply the price and profit by the cost divided by 100, and you have the answer for any product.

Margin to markup: the reverse table

Sometimes you know the margin you need and want the markup that gives it. This table runs the other way: pick the margin, read the markup. A 10% margin needs an 11.11% markup. A 20% margin needs a 25% markup. A 25% margin needs a 33.33% markup. A 33.33% margin needs a 50% markup. A 40% margin needs a 66.67% markup. A 50% margin needs a 100% markup. The pattern to remember is the middle of the table: a 25% margin is a third on cost, and a 33.33% margin is a half on cost. If you plan your business in margins — keeping 25 paise of every rupee, say — this table tells you what to add to the cost to get there.

markup to margin: margin = markup ÷ (100 + markup) × 100
margin to markup: markup = margin ÷ (100 − margin) × 100

Values between the rows

Real markups rarely land on a table row. A 15% markup on ₹100 of cost gives a price of ₹115, a profit of ₹15 and a margin of ₹15 ÷ ₹115 × 100 = 13.04%. A 40% markup gives a price of ₹140, a profit of ₹40 and a margin of 28.57%. A 75% markup gives a price of ₹175, a profit of ₹75 and a margin of 42.86%. The rule is always the same: price = cost × (1 + markup%), and margin = profit ÷ price × 100. The table gives you the round numbers; the calculator fills in the rest, and the formulas above let you check any row by hand.

Using the sheet to check an answer

The sheet is also a fast way to catch a wrong total. If your calculation says a 50% markup on ₹800 gives a price of ₹1,600, the sheet says otherwise: the 50% row reads ₹150 on ₹100 of cost, so on ₹800 it is 8 × ₹150 = ₹1,200, not ₹1,600. The ₹1,600 figure is a 50% margin, not a 50% markup — the classic mix-up, caught in seconds by a table lookup. If your margin comes out bigger than your markup, the sheet catches that too: the margin column never beats the markup column, so a margin above the markup means the two were swapped. Check the row first, then the maths.

Frequently asked questions

What is the price of 100 rupees of cost at 50% markup?

₹150, with ₹50 profit and a 33.33% margin. The price is ₹100 × 1.50 = ₹150.

What markup gives a 25% margin?

A 33.33% markup. The conversion is markup = margin ÷ (100 − margin) × 100, so 25 ÷ 75 × 100 = 33.33%.

What is the margin on a 100% markup?

50%. A product costing ₹100 at 100% markup sells for ₹200, so the ₹100 profit is half the price.

How do I use this table for a cost of 400 rupees?

Multiply the row by 4. At 25% markup the table reads ₹125 on ₹100 of cost, so on ₹400 it is 4 × ₹125 = ₹500, with ₹100 profit and a 20% margin.

More guides on the Markup Calculator

Try it yourself

Try the Markup Calculator — free, in your browser.

Open the Markup Calculator